Close
You have no items in your shopping cart.
Search

TH350 X JEEP DANA 18/20 10 SPL

SKU: 50-3100
$633.42
excluding shipping
GM TH350 3 speed, 2WD automatic transmission to the Jeep / Scout Dana 18 & 20 transfer case adapter kit. T/C will be switched to a 6 spline input 20 degree pressure angle
+ -

Advance Adapter

The GM TH350 adapter to the Dana 18 is a short 1.850". And the overall length of transmission and adapter is 23.35". The adapter material is 356 T-6 heat treated aluminum alloy and the adapter has a provision for a transmission. The adapter kit includes a adapter housing, new 4wd TH350 output shaft, 6 spline spud shaft with a new Dana 18 input gear (6 spline internal), nylon bushing, bearing, snap ring, o-ring, seal, gasket, fastening hardware and adapter instruction.

Note: The 4WD TH350 stock output shafts are getting hard to come by, which has increased their price. Unfortunately, we have had to adjust the kit pricing. Check with your local transmission shop to see if they have a shaft in stock for less than $120.00. If so, you can order this kit minus the output shaft. P/N 50-3101

Transfer Case

This adapter assembly will fit any Dana Spicer 18 with a 10 tooth female drive gear. The transfer case index to the new adapter will require an index retainer & sealed bearing. Please I.D. the transfer case bore size (3-1/8") small hole or (4") large hole for proper retainer. Additional information can be obtained in our on-line catalog, Jeep & Scout Vehicle Section: Transfer Case Information, Jeeps 1941-79.

*20 Degree pressure angle gear:

Model 18 transfer cases with 2.46:1, w/ T14 transmission, 1 ¼” intermediate shaft CJ with Buck V6 (68-71) Drive gear# 18-8-50 (947382) ---29 tooth x 10 spline Intermediate Gear # 18-5-9 (809293) ---39 tooth x 18 tooth **Requires AA part # 52-1401 18-8-23 (809297) 29 tooth x 6 spline (SUPPLIED IN KIT)

17 Degree pressure angle gear: Model 18 transfer cases with 2.03:1, w/ T14 transmission, 1 ¼” intermediate shaft Jeepster/CJ (67-74) models 18/20 Drive gear# 18-8-49 (947339) ---26thx10sp. Intermediate Gear# 18-5-16(946786) 34thx20th (Special order gear) 52-1402

Transmission

This adapter kit is designed for exclusive use with the 2wd GM TH350 automatic transmission. This GM automatic was commonly found stock in vehicles from 1969-81. It was used in both pickups and car applications. On 2wd transmissions, GM used three different tailhousing lengths. These lengths of the tailhousing are 6", 9", and 12". The output shaft length corresponds with these tailhousing lengths.

Bill Of Materials

Products specifications
Transmissions GM TH350 Automatic 2 Wheel Drive GM 1972-1984
Transfer Cases Jeep Dana Spicer 18 (10 Spline Input)
*
*
*
Customers who bought this item also bought

SHAFT-TH350 4X4

 350 SHORT TURBO SHAFT
$121.36
excluding shipping

SEALED BEARING 209RS

 SEALED BEARING 209RS
$21.11
excluding shipping
Digital Downloads