Through the analysis of other successful transfer case designs, we have manufactured a rugged, all gear-driven transfer case. Combining the latest in CAD/CAM technology and years of in-house CNC machining capabilities, the Atlas transfer case is sure to bring you the utmost in dependability and performance. The Atlas is available for both left and right hand vehicle applications with centered rear differentials.
The solid, one-piece case design is manufactured from 356-T6 heat-treated aluminum alloy. This material is also used for the structural access cover and all other exterior components. The massive gears are helical cut and synchro-equipped for quiet performance and "shift-on-the-fly" capability. These gears are supported by needle bearing elements, precision matched to strong 8620 shafts. The ruggedly designed output shafts are amply supported by large taper bearing sets. The Atlas also features a unique twin stick design to deliver crisp, quiet operation.
The Atlas transfer case offers you the ability to customize the transfer case to your vehicle.
We offer several upgrades, options, and different configurations for this transfer case. Atlas is the ultimate gear driven transfer case.
CASE: Material: 356-T6 Heat Treated Aluminum Weight: 110 lbs. (dry)
INTERNAL COMPONENTS: Gears: Helical Cut Bearings: Needle & Taper Rollers
Synchronizers: Borg Warner
Available Input Shaft Splines: 10, 21, 23, 27, 28, 29, 31, 32, 34, 35
Tail Shaft: H.D., 32 Spline, Optional 300M output also available
Front Output: 32 Spline
RATIOS: Low Range: 1.5:1 or 2.0:1 or 3.0:1 or 3.8:1 or 4.3:1 or 5.0:1.
Gear sets are offered with a 1.25" idler which is our "Trail Series" The Atlas Trail Rated case is our standard application Atlas for most stock vehicles.
Gear sets are offered with a 1.5" idler which is our "G2/G3 Pro Rated". The Atlas G2 Pro Rated case is designed for Race competition vehicles. The case has a 300M output shaft and super finished gears. This case is race-proven and excels in short courses as well as K.O.H.
High Range 1:1
TEMPERATURE: Normal Operating Temperature : 160F - 175F Degrees
Intermittent High Horsepower : 190F - 220F Degrees
Max Temperature : 230F - 240F Degrees
LUBRICATION:
Quarts:2.0 Liters:1.98 We are currently shipping Redline 75W-90 GL4 with all new Atlas units, this along with the other lubricants that are printed in our Atlas Installation Guide are the recommended fluids for the Atlas. LENGTH COMPARISON: *Atlas Short tail 11.8" NP 231, 20.5" *Atlas Long tail 13.8" NP241 Rock Trac T/C, 15-1/4" Dana 300, 12"
ATLAS O.A.L. with STD.tailhousing & Short tailhousing
the Yoke list
1310 NONCV................... 13.405”...............11.380”
1310 CV ..........................13.842” ..............11.817”
FLANGE 1300................12.224”.................10.199”
1350 NON CV...............13.467”................. 11.442”
1410 NON CV...............13.655”..................11.630”
1350 CV.......................14.027”...................11.815”
FLANGE 1410............12.092”...................10.067”