50-8603 : Jeep Ax15 Adapter Kit to Dana 300 (#50-8603)

The Jeep AX15 adapter to the Jeep Dana 300 adapter is .750” in length. Due to the AX15 and Dana 300 having two different rotations, this “clocking” ring will allow the two units to be bolted together and provide the Dana 300 with four rotation angles.

 

Our adapter / rotation ring kit consist of a Dana 300 rotation ring, new Dana 300 index retainer, sealed bearing, gaskets, fastening hardware and adapter instructions.

 

 

The adapter assembly will fit the Jeep Dana 300. This transfer case was used in the 1980-’86 CJ-7 series. All 300s use a 23 spline female input shaft. Some of the adapters we manufacture include a new Dana 300 input with a different input spline. Therefore, if you obtain a Dana 300 from a salvage yard, please verify the input spline.

 

The Jeep AX15 transmission is a medium-duty, standard shift, five-speed transmission found in 1989-1999 Jeep XJ, YJ & TJ models coupled with the 258 / 4.0L engines. The overall case length is 24.00”. The output shaft is 23 spline and protrudes approx .400”.

NOTE: If using the Jeep AX5 transmission, we offer kit 50-3021.

NOTE: THIS IS NOT A FLIP KIT, THE DANA 300 WILL STILL BE PASSENGER SIDE FRONT DROP!!!